8、【 ShanWanQ36XSP 】Switch JOYCON Mode Mario Party Game

JOYCON mode 3.29 firmware version button schematic diagram

JOYCON mode 3.30 firmware version button schematic diagram

Bluetooth connectivity

1. Handle toggle switch: Switch to S mode;

2. On the Switch console, select Controller → Change Grip/Order to enter the Switch console pairing interface for pairing;

3. Using JOYCON left joystick mode, press the L2 key on the joystick first, then press the house key to turn on the device, and the white indicator light will flash. Using the JOYCON right joystick mode, press the R2 key on the joystick first, then press the house key to turn on the device, and the indicator light will flash green;

4. Connect successfully and the LED light stays on. Then press the L1 key on the left handle and the R1 key on the right handle simultaneously to confirm use;

5. After successfully connecting and using it again, you can directly press the Home button (house button) to automatically reconnect;

6. Press the Pair pairing button again to turn off the device.

Matters needing attention:

1. The firmware version of Q36XSP controller needs to be 3.29 or above to support JOYCON mode;

2. In JOYCON mode, after entering Mario Party game, the controller automatically shuts down and needs to be reconnected, automatically assigned to left and right single controller mode (this is a normal operation, and even JOYCON original controllers will);

3. Enter the game with the first controller as the main controller, responsible for the main operations;

4. The joystick lacks L3 and R3 keys in firmware version 3.29, and after upgrading to 3.30, L3/R3 keys were added;

5. After upgrading from firmware version 3.29 to 3.30, there have been changes in the layout of the controller buttons, as demonstrated in the above figure.